Toll Free 1-866-867-0306

Operating the Locking Mechanisms

FireKing cabinets offer a number of locking options. Identify your type of lock and follow the instructions below. Do not attempt to close drawer when the lock bolt is extended; damage to cabinet and/or lock may result.

 

NOTE FOR COMBINATION LOCKS: Turn dial slowly and steadily. If any number is misdialed, the entire combination must be redialed.

Standard Key Plunger Lock

To Lock:

  1. Push the lock plunger in until it snaps into place.

To Unlock:

Insert key into lock. Turn to the right until the plunger pops out.

 

Standard Combination Lock Only

(Sargent & Greenleaf)

To Unlock using Your Preset Combination
  1. Turn dial to the left four revolutions, stopping when the first number of your combination is aligned with the opening index.
  2. Turn dial to the right three revolutions, stopping when the second number of your combination is aligned with the opening index.
  3. Turn the dial to the left two revolutions, stopping when the third number of your combination is aligned with the opening index.
  4. Turn full right slowly until dial reaches positive stopping point and bolt retracts.

To Lock:

  1. Close the cabinet and turn the dial to the right at least four complete revolutions. DO NOT stop at the first number of the combination.

 

Standard Combination & Keylock for Dual Control

To Unlock Using Your Present Combination

  1. Follow instructions 1 through 4 for opening the Standard Combination Lock with your combination.
  2. AFTER working the combination, insert the key in the keylock and unlock.

To Lock:

  1. Close the cabinet; push the plunger in until it locks.
  2. Turn the dial to the right at lease four complete revolutions. DO NOT stop at the first number of the combination.