Toll Free 1-866-867-0306

Locks for Safes - SUPPORT

LpLOCKS Electronic Keypads

Effective September 2008 safes which were being manufactured with LaGard Basic electronic keypad locks are now being manufactured with the LpLOCKS "Baseline" EL-20 (or EL-25) electronic keypad locks.

General Info (EL-20 & EL-25)
• 6-Digit code. Factory default = 123456.
• Blink and beep with each button press.
• Double-beep after last digit of valid code.
• Long beep after invalid entry. Four invalid entries results in 5 minute lockout (10 second flashes and long beep if any button is pressed).
• Triple-beep indicates lock bolt jam.
• Wait 20 seconds after a failed entry attempt before trying again.
• Factory code = 123456
• To change combo: Press and hold "0" until double-beep, enter old code (double-beep), enter new code (double-beep), enter new code again (double-beep). If any error occurs the old code remains.

EL-25 Opening Door with Delay
• Enter code. (Double-beep indicates correct code).
• Beep and flash every 10 seconds while delay is in progress.
• When delay ends, the open period begins.
• Open period indicated by rapid beep and flash once per second.
• Enter code. (Double-beep indicates correct code).
• Open safe.

EL-25 Self-Diagnostic Feature
• Press and hold "5" until double-beep.
• Press each number button in sequence from "1" to "0" and listen for double-beep after each.
• If each button double-beeps then all number buttons are working.

EL-25 Add/Change Second User
• Press and hold "1" until double-beep and light remains on.
• Enter primary code then enter new user code twice.
• If each button double-beeps then all number buttons are working.
• Test second user to verify operation.

EL-25 Delete Second User
• Press and hold "3" until double-beep.
• Enter primary code. Double beep indicates second user is deleted.

EL-25 Edit Door Delay
• Enter code. (Double-beep indicates correct code).
• Beep and flash every 10 seconds while delay is in progress.
• When delay ends, the open period begins.
• Open period indicated by rapid beep and flash once per second.
• Press and hold "9" until double-beep and light turns on solid.
• Enter primary code.
• Enter delay minutes (two digits) and open period minutes (two digits). For example: 0502 = 5 minute delay and 2 minute open period.
• Double-beep and light goes out indicates change successful. If there is no double-beep the change was not accepted. 

LaGard Electronic Keypads

There are several LaGard digital combination locks available for various FireKing Security Group safe brands. For complete instructions on any of these digital keypad systems select the corresponding PDF document below.
 
LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock

LaGard Digital Keypad Safe Lock


S&G 6120/6123 Electronic Keypad

6120 Operation and Programming Instructions
PDF 6123 Operation and Programming Instructions
PDF Training Guide
PDF Troubleshooting Guide
PDF Reset Instructions
 
S&G 6120 Keypad
S&G Keypad Back
S&G 6120 Keypad: Front
S&G 6120 Keypad: Back
Changing the Master Code
1. Press 74.
2. Press *.
3. Enter the existing six-digit Master Code.
4. Press #1*.
5. Enter the new six-digit Master Code.
6. Press #.
7. Enter the new six-digit Master Code again.
8. Press #. The lock will emit 3 disticnt chirps if the new code is accepted. If a long tone is heard the code is not accepted.

Changing/Adding a User Code
1. Press 74.
2. Press *.
3. Enter the six-digit Master Code.
4. Press #.
5. Enter the user number (2 through 9).
6. Press *.
7. Enter the new six-digit user code.
8. Press #.
9. Enter the new six-digit user code again.
10. Press #. The lock will emit 3 disticnt chirps if the new code is accepted. If a long tone is heard the code is not accepted.

Deleting a User Code
1. Press 74.
2. Press *.
3. Enter the six-digit Master Code.
4. Press #.
5. Enter the user number (2 through 9).
6. Press *##. The lock will emit 3 disticnt chirps to indicate the user is deleted.

S&G 6120 Lock Won’t Open
1. Replace the batteries. Make sure to use good quality alkaline batteries: Energizer (first choice) or Duracell (second choice).
2. If the lock solenoid still does not pull back and the keypad appears to operate correctly try placing the batteries in series (18 Vdc). Otherwise replace the keypad.
3. Drill and replace the lock.

ImageDuis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat.

ImageUt wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat. Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis at vero eros et accumsan et iusto odio dignissim qui blandit praesent luptatum zzril delenit augue duis dolore te feugait nulla facilisi.

ImageNam liber tempor cum soluta nobis eleifend option congue nihil imperdiet doming id quod mazim placerat facer possim assum. Lorem ipsum dolor sit amet, consectetuer adipiscing elit, sed diam nonummy nibh euismod tincidunt ut laoreet dolore magna aliquam erat volutpat. Ut wisi enim ad minim veniam, quis nostrud exerci tation ullamcorper suscipit lobortis nisl ut aliquip ex ea commodo consequat.

Duis autem vel eum iriure dolor in hendrerit in vulputate velit esse molestie consequat, vel illum dolore eu feugiat nulla facilisis. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, At accusam aliquyam diam diam dolore dolores duo eirmod eos erat, et nonumy sed tempor et et invidunt justo labore Stet clita ea et gubergren, kasd magna no rebum. sanctus sea sed takimata ut vero voluptua. est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat.

Consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Stet clita kasd gubergren, no sea takimata sanctus est Lorem ipsum dolor sit amet.